
Local 70cm DMR Repeater
Located in
Market Harborough in the Welland Valley
Listen
Online
Click here for the GB7WV Dashboard
where you can see in realtime the status and who is on the repeater etc.
Basic Help
- You need your recieve frequency set to 439.6875MHz
- You need to transmit frequency set to 430.6875MHz (-9MHz offset)
- You need to configure your radio to use Colour Code 2
- Slot 1 on the repeater is now configured as a local repetarer to
encourgae local use.
- Slot 2 on the repeater is configured to reconnect to UK-Wide Talk Group
2350 after being idle for 15 mins.
- If you want to check the status of the repeater to see what it's
connected to on Slot 2, just send 5000 and a robot voice with confirm if and
who it is connected to.
- To disconnect from a connected talk group, just send 4000 and a robot
voice will say disconnected.
- You can then call into another talk group by just sending the number of
the talk group you want to connect to (eg 2350)
- If you leave the new talk group connected after 15 mins it will
disconnect and reconnect to UK Wide Talk Group 2350.
To listen online to Talk Group 2350
click here